I bought a 1TB MX300 (S/N: 1652152BC31D) from Amazon on 02/11/17, as an upgrade from a SanDisk 500GB SSD in a laptop (Dell Inspiron 11 3153). I cloned the original drive to the MX300 using Macrium Reflect and all was well. On 03/06/17 the Drive Died. Laptop wouldn't boot. I put the SanDisk back in and the system came up. When I attach the MX300 to the USB Adaptor I used to clone it and attach it back to the system it shows up as a drive in the System but without any capacity. When I try to launch Disk Management with the Drive attach it never connects to the Disk Management Service. How should I proceed?