09-18-2013 07:23 AM
I try to install the following OS on my SSD drive :
But when the setup finish while Windows finish the setup process with the first Windows boot, the computer restart with no error and Windows switch to the recovery mode.
Here's some information about the hardware :
Thanks for your help.
09-26-2013 12:52 PM
I am sorry for the delay in response and that you have had issues installing your OS on your system. Have you resolved the issue with the OS on your SSD drive yet? How were you installing the operating system? Was it a fresh install or were you using a transfer software? Thank you in advance for this information.
09-29-2013 04:06 AM
Unfortunately I not resolved the issue yet. I use an USB UEFI key to install the OS for a fresh install.
On another motherboard there's no problem with the Crucial M5, and with a mecanical hard drive on my motherboard no problem too. I also try while changing all the cable and sata port.
10-02-2013 07:33 AM
First of all I'm sorry to hear that you are having problems with your SSD.
We don't actually recommend our SSD's for server systems at all. They are designed for the consumer market and not for server systems. The problems you are having seem to be due to a fault with the installation of the operating system, however we would not recommend using our SSD's for server systems.
If you ordered the drive direct from Crucial within the last 45 days I would recommend arranging a return for the drive, if it was ordered from another company I would contact them directly.
We don't actually list our SSD's as compatible with any server systems. Sorry for any problems this may have caused.
10-04-2013 02:10 AM
I also got the same problem with :
And on another computer I haven't the issue. I also try with th last firmware (MU03)
03-21-2014 03:44 PM
Still no resolution?
I'm trying to install Windows 8.1 Pro into a new system:
I've configured the SATA for RAID, and the single SSD as RAID READY (I have two 500GB WD Blue drives to be used as RAID 1 once the OS is installed).
The BIOS sees the drive, but Windows does not. I changed the SATA for IDE and there was no problem.
03-22-2014 01:20 AM
Did you try to use AHCI driver from Asus site? http://dlcdnet.asus.com/pub/ASUS/misc/sata/AMD_AHC
You can unzip the content of the archive to USB pendrive and use the files at the begining of W8.1 setup. Check ReadMe file for details.
FAQs and Top Forum Solutions
Did a user help you? Say thanks by giving Kudos!
How do I know what memory to buy?
Still need help? Contact Crucial Customer Service
Remember to regularly backup your important data!