Before you can use your new SSD with your Mac, or install OS X onto it, you have to initialize and partition it first. Follow the steps in this article if you are using OS X El Capitan or later. If you have not upgraded, follow our guide for earlier versions of OS X.
1. If you are adding a drive to an existing setup, connect the SSD via USB adapter or other external connection method and enter Disk Utility, or install the SSD internally into your system and enter Disk Utility via the OS X Recovery tool or your installation media. When the SSD is noticed by the Mac, you will see a message telling you that the drive cannot be read by this computer. In this message, click the button Initialize.
2. The Crucial SSD will be listed in Disk Utility. Highlight the SSD and click the Erase button.
3. Type in the name you would like for the new partition and verify that it's set to "GUID Partition Table".
4. Verify that the selected format has defaulted to "Mac OS Extended (Journaled)".
5. Select Erase. The drive will now be partitioned and formatted.
6. When the Disk Utility is done, close it.
The SSD should now be visible on your desktop with the new name you gave it, as well as during the drive selection menu if your run an OSx installer.
If you need assistance with the physical installation of your SSD, we offer guides for installing a replacement SSD here.