06-29-2013 08:41 AM - edited 06-29-2013 08:44 AM
Have had several attempts at updating the firmware on my 256GB M4 SSD, but have had little joy so far.
The above Invalid Opcode error in Sata 0 position
The same error in Sata 1 below
Im upgrading in a Dell XPS 435 desktop , BIOS settings set to RAID . Only other setting in option is SATA (there is no ACHI) .
Has anyone got any ideas?
Thanks in advance
Solved! Go to Solution.
06-29-2013 08:45 AM - edited 06-29-2013 08:47 AM
You can't upgrade in raid mode. Set it to sata, upgrade, then back to raid.
I have the previous model - the XPS420.
06-29-2013 10:33 AM
hmm..ok i tried that..it doesnt appear to matter what SATA mode i set in BIOS, ATA or RAID, i get the same Invalid Opcode error returned in both SATA port 0 and Sata port 1..
while the Windows Update Tool v 220.127.116.11 ( I tried that before resorting to a Bootable CD!) does not even see the M4 drive in my system...
..i dont have another machine to try getting the firmware upgraded in. Would i be able to upgrade the firmware using something like this http://www.scan.co.uk/products/icy-box-ib-223u3-b-polycarbonate-enclosure-fits-25-sata-hdd-ssd-usb-3...
or failing that can i send the drive back to crucial under warranty (drive is 8 months old) to perform the upgrade on my behalf?..i really dont know which way to turn with this
the underlying issue i have is drive hang during resume from Sleep which on the face of it is cleared by a reboot - well until the next time the drive decides to hang. Reading the Release notes - firmware 070H appears to be the fix for this occurrence.
06-29-2013 11:13 AM - edited 06-29-2013 11:13 AM
With regards to your specific issue, are you using Intel Rapid Storage Tech drivers? Mine hangs randomly on resume with 11.5 or newer of those drivers under Windows 7. 11.2 works best. Curiously all versions work OK on Windows 8 though.
With regards to the firmware, it has helped people to disconnect all drives except the SSD and the cd drive being used to update the firmware from. Remember to be in ATA mode whilst trying that.
You can't update the firmware from anything other than an internal sata port.
06-30-2013 03:34 AM
sorry for the delayed response..Yes, I am using IRST drivers, version 18.104.22.168 which i think is the current version. I'm on Windows 8. This hang issue does not occur very often admittedly but just enough to be frustrating all the same. All drives bar the SSD and the cd drives have now been disconnected. However, with BIOS set to ATA and regardless of which SATA internal port i use, I am still getting the Invalid Opcode error.
06-30-2013 04:26 AM - edited 06-30-2013 04:28 AM
Try 11.2 of the Intel drivers.
'Invalid Opcode' is unfortunately a generic 'freedos doesn't like your computer' error code and is pretty hard to diagnose.
07-02-2013 07:10 AM