Problem after memory installed

Kilobyte Kid

Problem after memory installed

I am adding 2GB more ram to my computer and when i tried my comp wont boot up and my cpu fan runs at full speed. I tested all the memory sticks they work fine my MB supports 4 GB so im not sure what is going on. Any help would be appreciated, oh and the memory stick are identical.

 

i have

 

Windows 7 64 bit OS

AMD athlon 64x2 4400+ 2200 MHz processor

DFI Corp,LTD LP UT NF4 Expert   MB

4 Crucial 1GB 184 pin DIMM 128x64 DDR

 

Thank You

3 Replies
Kilobyte Kid

Re: Problem after memory installed

I fixed it Smiley Very Happy

 

I went to bios  then into Gennie Bios Setting and changed the DRAM power setting to 4.00 from 2.66 .  I had read this on another web page from someone who had same problem.

 

Hope this helps someone

Kilobyte Kid

Re: Problem after memory installed

I ALSO DID THIS  go to advanced bios features you will see OS select DRam 64 MB OS2 off. Turn this to ON or when you shut down the computer it wont boot.Smiley Surprised

Kilobyte Kid

Re: Problem after memory installed

i Found that  i lowered my Dram voltage to 3.01 also changed Bios to max power usage now it starts ok without have to use rear power switch.